Commercial Strength Equipment: Selectorized, Plate-Loaded and Free Weights

Functional Trainer Machine DL731

2026-11-12

This compact, commercial-grade functional trainer is built for hotel and office gyms where ceiling height decides the layout.

Two 70 kg stacks on a 1792 mm frame: 184 kg per square metre on the slab, and 2283 mm overall height so it clears a 2400 mm soffit by 117 mm with the mirror still on the wall.

Standing Calf Raise Machine DL729

2026-11-10

The only station in a strength room where the member's own body weight joins the resistance instead of sitting outside it.

Shoulder pads press down on a standing member, so plantar flexion lifts the pin and the body together: 100 kg on the stack is about 175 kg through the ankles for a 75 kg member. 991 × 1236 mm, 210 kg net, 171 kg/m² on the slab.

Seated Calf Raise Machine DL728

2026-11-10

Built for the one calf station a standing machine cannot cover: with the knee at ninety degrees the gastrocnemius is shortened out of the movement and the soleus takes the load.

A thigh pad holds that position set after set, and 80 kg of stack is enough because the load reading excludes the member who is seated on it. 746 × 1618 mm of footprint puts 157 kg/m² on the slab.

Seated Leg Press Machine DL727

2026-11-10

A commercial-grade seated leg press for rooms that need heavy leg work with the spine out of the load path.

The back pad takes the reaction force a barbell would send down the vertebral column, and because the member is seated, body weight never enters the lever: 100 kg on the pin is 100 kg against the feet, on a 1205 × 1117 mm footprint that puts 208 kg/m² on the slab.

Seated Leg Curl Machine DL726

2026-11-08

This competitively priced, commercial-grade seated leg curl machine is built for gyms that need hamstring work without loading the knee or the lower back.

A thigh pad locks the pelvis and holds the hip at ninety degrees, so the hamstrings cannot borrow from the hip: 80 kg on a 0.29 m ankle lever is about 230 N·m of knee flexion torque, on a 1458 × 1053 mm footprint that puts 132 kg/m² on the slab.

Leg Curl Machine DL725

2026-11-06

This competitively priced, commercial-grade leg curl machine is built for gyms that train the back of the thigh and not only the front.

Face down with the hip extended, so the hamstring is loaded long: 80 kg on a 0.30 m ankle lever is roughly 235 N·m of knee flexion torque, on a 1470 × 1014 mm footprint that puts 134 kg/m² on the slab.

Leg Extension Machine DL724

2026-11-05

This competitively priced, commercial-grade leg extension machine is specifically designed for gyms.

The only station in the range that isolates the quadriceps: 80 kg on a 0.35 m lever is roughly 275 N·m of knee extension torque, delivered from a 1322 × 1053 mm footprint that projects 611 mm less into the room than the hip machines it normally sits beside.

Abductor Machine DL723

2026-11-03

This competitively priced, commercial-grade abductor machine is specifically designed for gyms.

The same tower, base and 80KG stack as the DL722, with the moving arm reversed: abduction owns the full stack and its own cable instead of sharing them with the opposite movement, in 746 mm of width that puts the frontal-plane hip work most members never train into a corner of the strength run.

Adductor Machine DL722

2026-11-03

This competitively priced, commercial-grade adductor machine is specifically designed for gyms.

The same tower, base and 80KG stack as the DL723, with the moving arm reversed: 746 mm of width for hip adduction alone, 161 kg/m2 of floor loading for upper-floor siting, and a pad position set for the inner-thigh start angle instead of compromising with the opposite movement.

Inner and Outer Thigh Machine DL721

2026-11-01

This competitively priced, commercial-grade inner and outer thigh machine is specifically designed for gyms.

Two opposite movements on one seat in 750 mm of width: a single lever reverses the resistance so adduction and abduction share an 80KG stack, replacing the two single-function units that would otherwise take two slots.

1
2
3
Next Page
Total Pages: 4

Cardio Equipments

Strength Training

Popular tags

Commercial Strength Equipment: Selectorized, Plate-Loaded and Free Weights

Functional Trainer Machine DL731

Standing Calf Raise Machine DL729

Seated Calf Raise Machine DL728

Seated Leg Press Machine DL727

Seated Leg Curl Machine DL726

Leg Curl Machine DL725

Leg Extension Machine DL724

Abductor Machine DL723

Adductor Machine DL722

Inner and Outer Thigh Machine DL721

Contact Us

Contact now

Contact now. Get the best solution!

Contact now. Get the best solution!