Seated Chest Press Machine DL701

The DL701 uses an 80 kg weight stack, and maximum user load is 160 kg. The cable is rated above 1400 kg. Stack increments and pivot geometry are set for high-repetition commercial use rather than light home training, which is why the same frame holds up in unsupervised gyms.

It measures 1173 × 1333 × 1660 mm (L x W x H). Net weight is 225 kg. Allow extra clearance at the front for handle and arm travel, and keep the unit on a level, load-bearing floor finish: a frame this heavy will rock on an uneven slab and the pivot will wear early.

Main frame is Q235 steel, 120 × 75 × 3.0 mm bread-type tube; secondary tubes are 120 × 50 × 3.0 mm flat oval tube. This is the tube specification used across our commercial range, so the same frame carries hotel and club traffic without flexing, and it is the reason the unit is rated for unsupervised member use rather than home training.

Net weight is 225 kg. It ships partly assembled; site work is positioning, stack loading and a full cable and pivot check before handover. Two people with a pallet truck can move it, and no floor anchoring is needed on a level slab.

The order minimum is ten units in total, and it applies to the whole order, not to any single model. One unit of this machine is enough, with the remaining nine made up from other equipment. Ten units matches the equipment count of a small 50 sqm gym, which normally needs ten to eleven pieces.

Lead time runs from order confirmation to cargo ready at Shenzhen port, excluding ocean freight. In-stock models ship in 7-10 days, regular production takes 25-35 days, and customised or private-label orders need 35-45 days including sample approval. We quote the sea leg separately so nothing is hidden inside one vague date.

One year on the whole unit. Frame, weight stack, cable and pivot are all covered against manufacturing defects and functional failure under normal commercial use. Upholstery pads, grips and cables are wear parts and sit outside the warranty, as does damage from misuse or unauthorised modification.

Payment is completed before shipment: deposit to book production, balance before the container leaves. Because that is stricter than documents against acceptance, we back it with an inspection right: your own agent or SGS, BV or TUV can come to the factory before you release the balance, and every container ships with loading photos and a loading plan.

It is manufactured to meet or exceed EN ISO 20957-1 and the applicable part of the EN 957 series: EN 957-2 for strength equipment, EN 957-5 for exercise bikes, EN 957-6 for treadmills, EN 957-9 for ellipticals. Our production partners run CE-certified lines for these categories, but because we sell under our own brand and model names the certificate is not issued in our name, so we state compliance with the standard rather than claim a certificate. Tell us what your tender or customs broker requires before ordering and we will confirm what can be provided.

Both are routine. We run OEM and ODM work for brands and distributors: logo, colour, packaging and nameplate. Mixed-model orders are how most first orders are built. Tooling-free changes are quick; anything that needs a new mould or frame change is quoted with its own lead time.

We issue a CAD floor plan, a full equipment list with item counts and a budget range for the area you send us, plus installation manuals and a loading plan with each shipment. Drawings go out before the order is placed, so machine spacing and circulation can be checked against the room before anything is cut or shipped.