Multi-Function Commercial Treadmill DP71T

It uses a 4.0 HP AC motor, driving a 1600 × 580 mm running area over a None deck with a 3.5T tyre pattern belt, at 0.5-25 km/h and 0-20% incline; maximum user weight is 185 kg. The drive is specified for continuous duty rather than peak output: a hotel row runs for hours without an idle gap, and motors in this price band overheat under that pattern.

It measures 2180 × 920 × 1530 mm (L x W x H). Leave clearance at the rear for the incline motor and at the front for entry and exit at speed; the deck also needs a level, load-bearing floor because the frame will not compensate for a sloping slab.

Net weight 210 kg, gross 260 kg, packed in 2130 × 960 × 400 mm. It ships partly disassembled for container loading, with the console and handrails removed and the deck braced, so on-site work is re-fitting, levelling and a load test. Maximum user weight is 185 kg.

Ten units per order in total, with no per-model minimum: you can take one unit of this model and fill the rest of the order with other machines. Ten units is roughly the complete equipment list of a small gym of about 50 sqm, so one order equips a whole floor rather than a single station.

Counted from order confirmation to cargo ready at Shenzhen port, and it excludes ocean freight: 7-10 days for in-stock models, 25-35 days for regular production, 35-45 days for customised or private-label orders. Sea freight is quoted separately once the destination port is confirmed, so factory time and shipping time stay two separate numbers.

One year on the complete machine, and the motor carries a separate five-year warranty. Coverage is for manufacturing defects and functional failure under normal commercial use. Consumable parts such as running belts, pads, pedals and grips, and damage from misuse, overload or unauthorised modification are not covered.

A deposit at order confirmation books production, and the balance is settled before the container leaves the factory. Before you pay the balance you can arrange inspection by your own agent or a third party such as SGS, BV or TUV at our Huizhou factory, and we send loading photos and a container loading plan for every shipment.

The machine is built to meet or exceed EN ISO 20957-1 and the relevant part of EN 957. The production lines that build it are CE-certified for this category, but the certificate does not carry our brand or model name, so we describe the equipment as compliant with the standard instead of presenting a certificate we do not hold. If you need specific documentation for a tender or for clearance, send us the requirement before the order is placed.

Yes. Frame colour, logo plate, console branding and upholstery colour can all be changed under our ODM programme, and you can mix this model with other equipment in the same order to reach the ten-unit minimum. Colour and logo changes need no new tooling; new moulds or altered frame geometry need a longer development window.

We issue a CAD floor plan, a full equipment list with item counts and a budget range for the area you send us, plus installation manuals and a loading plan with each shipment. Drawings go out before the order is placed, so machine spacing and circulation can be checked against the room before anything is cut or shipped.

Yes. We are at 29 Maidi Road, Huicheng District, Huizhou, Guangdong, about 60 km from Yantian port. Give us three days' notice and we will arrange the walk-through; we can collect you from Shenzhen or Guangzhou airport. Coming to see the frames, the welding and a finished unit tells you more than any catalogue.